spectro::lyser V3

ozo::lyser V3

Measurement of ozone in water is what the ozo::lyser V3 is optimized for. This member of the spectrometer family is optimized to determine concentrations of ozone dissolved in water online and InSitu. It offers an attractive alternative to classical electrochemical ozone sensors, thanks to its very low maintenance requirement and extreme stability.

 

ozo::lyser II monitors 2 of the following parameters: TSS, turbidity & ozone

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board – IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory – capacity for logging data for many years
  • improved optical performance – revolutionary precision
  • fast measurement interval – every 30 seconds
  • extremely power efficient – sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

Details Drinking Water(Opens in a new tab or window) Details Waste Water(Opens in a new tab or window)

Accessories- Installation

submersed

  • ruck::sack
    • submersible Autobrush for spectrometer probes and i::scan
    • exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm
    • one Basis module (motor unit) for all Versions
    • shelter protects the brush from clogging

     

    technical specification
    power supply: 12 VDC
    power consumption (typical): 150 mA (average)
    power consumption (max.): 300 mA
    cable length: 7.5 m
    housing material: POM-C
    dimensions (width x height x xdepth): 182 x 46 x 36.5 mm
    weight (min.): 750 g
    installation / mounting: submersed
    operating pressure 0 ... 0.5 bar
    ingress protection class: IP68
    storage temperature: -20 ... 80 °C
    storage humidity: 0 ... 95 %

    part numbers
    F-146-rs-35: ruck::sack submersible AutoBrush for spectro::lyser 35 mm
    F-146-rs-15: ruck::sack submersible AutoBrush for spectro::lyser 15 mm
    F-146-rs-05: ruck::sack submersible AutoBrush for spectro::lyser 5 mm
    F-146-rs-iscan-35: ruck::sack submersible AutoBrush for i::scan 35 mm
    F-146-rs-iscan-05: ruck::sack submersible AutoBrush for i::scan 5 mm

    recommended accessoires
    F-146-brush-35: Brush for ruck::sack - 35 mm spectro::lyser (spare part)
    F-146-brush-15: Brush for ruck::sack - 15 mm spectro::lyser (spare part)
    F-146-brush-05: Brush for ruck::sack - 5 mm spectro::lyser (spare part)
    F-146-brush-iscan-35: Brush for ruck::sack - 35 mm i::scan (spare part)
    F-146-brush-iscan-05: Brush for ruck::sack - 5 mm i::scan (spare part)

  • s::can compressor
    • provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling using compressed air
    • aluminium housing IP65 for wall mounting
    • optional 12 VDC or 110 VAC version available
    • railing-mounting set available

     

    technical specification
    power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
    power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
    power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
    assembling: ex works
    housing material: aluminium
    dimensions (width x height x depth): 218 x 253 x 105 mm
    weight (min.): 4.9 kg
    process connection: 1/4
    installation / mounting: Mounting bracket d6 / 0.25 dia
    operating temperature: -10 ... 40 °C
    operating pressure: 0 ... 6 bar
    Ingress protection class: IP 65
    tank volume: 0.4 l
    charging time: typ. 25 sec
    sound emission: 60dB(A)
    service interval: 1500 operating hours
    storage temperature: -10 ... 60 °C
    storage humidity: 0 ... 95%

    part numbers:
    B-32-230,
    B-32-110
    B-32-012

    recommended accessories
    B-44 cleaning valve
    B-44-2 cleaning valve
    C-31-eu optional 2 m power cable
    C-31-us optional 2 m power cable

  • cleaning valve
    • supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling, sediments and clogging using
    • compressed air or water
    • version B-44-2 specially for use in comination with the s::can compressor

    technical specification
    cable length: 2.4 m (B-44); 1 m (B-44-2)
    assembling: ex works
    dimensions (width x height x depth): 85 x 75 x 70 mm
    weight (min.): 500 g
    process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
    protection class: IP 65
    part number: B-44 or B-44-2

    recommended accessories
    B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
    B-41-spectro: pressure connection replacement set s:.can spectrometer probe

  • carrier s::can spectrometer probe
    • for proper and easy submersed installation of s::can spectrometer probes
    •  probe cable and pressure hose compatible
    • mounting with pipe (AD 50 mm)

     

    technical specification
    housing material: PVC and POM-C
    dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510 mm (for F-120-spectro)
    weight (min.): 900 g
    process connection: ID 50 mm
    installation / mounting: submersed
    part number: F-110-spectro (for horizontal attachment)
    part number: F-120-spectro (for vertical attachment)

    recommended accessories
    F-15 fixing adapter - stainless steel

  • fixing adapter - stainless steel
    • supports the proper and easy installation of s::can systems
    • quick mounting and demounting of InSitu installed s::can probes and sensors

     

    technical specification
    housing material: stainless steel
    weight (min.): 2.6 kg
    process connection: ID 50 mm
    part number: F-15

    recommended accessories
    F-14-3 mounting pipe - stainless steel

by-pass

  • s::can compressor
    • provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling using compressed air
    • aluminium housing IP65 for wall mounting
    • optional 12 VDC or 110 VAC version available
    • railing-mounting set available

     

    technical specification
    power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
    power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
    power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
    assembling: ex works
    housing material: aluminium
    dimensions (width x height x depth): 218 x 253 x 105 mm
    weight (min.): 4.9 kg
    process connection: 1/4
    installation / mounting: Mounting bracket d6 / 0.25 dia
    operating temperature: -10 ... 40 °C
    operating pressure: 0 ... 6 bar
    Ingress protection class: IP 65
    tank volume: 0.4 l
    charging time: typ. 25 sec
    sound emission: 60dB(A)
    service interval: 1500 operating hours
    storage temperature: -10 ... 60 °C
    storage humidity: 0 ... 95%

    part numbers:
    B-32-230,
    B-32-110
    B-32-012

    recommended accessories
    B-44 cleaning valve
    B-44-2 cleaning valve
    C-31-eu optional 2 m power cable
    C-31-us optional 2 m power cable

  • cleaning valve
    • supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
    • removal of fouling, sediments and clogging using
    • compressed air or water
    • version B-44-2 specially for use in comination with the s::can compressor

    technical specification
    cable length: 2.4 m (B-44); 1 m (B-44-2)
    assembling: ex works
    dimensions (width x height x depth): 85 x 75 x 70 mm
    weight (min.): 500 g
    process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
    protection class: IP 65
    part number: B-44 or B-44-2

    recommended accessories
    B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
    B-41-spectro: pressure connection replacement set s:.can spectrometer probe

More Accessories

  • cleaning brush
    • supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
    • mechanical removal of persistent window fouling
    • for pathlength 2, 5 or 15 mm

     

    technical specification
    dimensions (diameter x length): length 200 mm
    weight (min.): 1 g
    part number: B-60-1 for 2 mm
    part number: B-60-2 for 5 or 15 mm

  • cleaning agent
    • supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
    • chemical removal of persistent window fouling
    • very effective for grease and organic fouling

     

    technical specification
    weight (min.): 1.3 kg
    part number: B-61-1

  • multifunctional slide for pathlengths from 0.5 mm to 35 mm
    • for referencing of spectrometer probes
    • for pathlength 0.5 - 35 mm
    • for spectral measurement in laboratory

     

    technical specification
    dimensions (diameter x length): 60 x 100 mm (outside)
    installation / mounting: for 0.5 mm to 35 mm
    part number: E-421-1

You may also like…

  • visu::tool

    visu::tool
    visu::tool is a fast and easy-to-use data visualization software for PCs and notebooks. In 3 simple steps you can visualize huge amounts of data from con::cube or con::lyte into single or multiple graphs. The visu::tool “lyte” version is available for free download. The advanced visu::tool “pro” version includes a vast…

  • micro::station for Drinking Water

    The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel. The fully modular micro::station combines s::can instruments…

  • micro::station for Waste Water

    The s::can micro::station for waste water is designed for online monitoring of water quality parameters in waste water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipes on a compact panel. The fully modular micro::station combines s::can…