multi::lyser V3
The multi::lyser is a combination of s::can carbo::lyser and nitro::lyser. That means that the s::can multi::lyser is characterised by measuring organic carbon & nitrate for a multitude of pre-defined applications. The multi::lyser is ideal for surface water, ground water, drinking water, wastewater and offers an optimum of cost effectiveness and performance.
multi::lyser™ IV monitors 4 of the following parameters: Turbidity, TSS, TS, TOC, DOC, BOD, COD, COD f, NO3-N, NO-3, UV254 and UV254 f
- measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
- web server on board – IoT enabled, no user software is needed to configure the probe
- communicates directly with your mobile device via WLAN
- choose exactly the parameters you want to measure – unlimited number of parameters possible
- 8 GB onboard memory – capacity for logging data for many years
- improved optical performance – revolutionary precision
- fast measurement interval – every 30 seconds
- extremely power efficient – sleep mode for low energy consumption
- multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
- long term stable and maintenance free in operation
- factory precalibrated, local multi-point calibration possible
- automatic cleaning with compressed air or brush/ruck::sack
Accessories - Installation
submersed
-
ruck::sack
- submersible Autobrush for spectrometer probes and i::scan
- exchangeble brushes for spectrometer probe with path length 35, 15, 5 mm and i::scan 35, 5 mm
- one Basis module (motor unit) for all Versions
- shelter protects the brush from clogging
technical specification
power supply: 12 VDC
power consumption (typical): 150 mA (average)
power consumption (max.): 300 mA
cable length: 7.5 m
housing material: POM-C
dimensions (width x height x xdepth): 182 x 46 x 36.5 mm
weight (min.): 750 g
installation / mounting: submersed
operating pressure 0 ... 0.5 bar
ingress protection class: IP68
storage temperature: -20 ... 80 °C
storage humidity: 0 ... 95 %part numbers
F-146-rs-35: ruck::sack submersible AutoBrush for spectro::lyser 35 mm
F-146-rs-15: ruck::sack submersible AutoBrush for spectro::lyser 15 mm
F-146-rs-05: ruck::sack submersible AutoBrush for spectro::lyser 5 mm
F-146-rs-iscan-35: ruck::sack submersible AutoBrush for i::scan 35 mm
F-146-rs-iscan-05: ruck::sack submersible AutoBrush for i::scan 5 mmrecommended accessoires
F-146-brush-35: Brush for ruck::sack - 35 mm spectro::lyser (spare part)
F-146-brush-15: Brush for ruck::sack - 15 mm spectro::lyser (spare part)
F-146-brush-05: Brush for ruck::sack - 5 mm spectro::lyser (spare part)
F-146-brush-iscan-35: Brush for ruck::sack - 35 mm i::scan (spare part)
F-146-brush-iscan-05: Brush for ruck::sack - 5 mm i::scan (spare part) -
s::can compressor
- provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling using compressed air
- aluminium housing IP65 for wall mounting
- optional 12 VDC or 110 VAC version available
- railing-mounting set available
technical specification
power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
assembling: ex works
housing material: aluminium
dimensions (width x height x depth): 218 x 253 x 105 mm
weight (min.): 4.9 kg
process connection: 1/4
installation / mounting: Mounting bracket d6 / 0.25 dia
operating temperature: -10 ... 40 °C
operating pressure: 0 ... 6 bar
Ingress protection class: IP 65
tank volume: 0.4 l
charging time: typ. 25 sec
sound emission: 60dB(A)
service interval: 1500 operating hours
storage temperature: -10 ... 60 °C
storage humidity: 0 ... 95%part numbers:
B-32-230,
B-32-110
B-32-012recommended accessories
B-44 cleaning valve
B-44-2 cleaning valve
C-31-eu optional 2 m power cable
C-31-us optional 2 m power cable -
cleaning valve
- supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling, sediments and clogging using
- compressed air or water
- version B-44-2 specially for use in comination with the s::can compressor
technical specification
cable length: 2.4 m (B-44); 1 m (B-44-2)
assembling: ex works
dimensions (width x height x depth): 85 x 75 x 70 mm
weight (min.): 500 g
process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
protection class: IP 65
part number: B-44 or B-44-2recommended accessories
B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
B-41-spectro: pressure connection replacement set s:.can spectrometer probe -
carrier s::can spectrometer probe
- for proper and easy submersed installation of s::can spectrometer probes
- probe cable and pressure hose compatible
- mounting with pipe (AD 50 mm)
technical specification
housing material: PVC and POM-C
dimensions (diameter x length): 63 x 403 (for F-110-spectro); 63 x 510 mm (for F-120-spectro)
weight (min.): 900 g
process connection: ID 50 mm
installation / mounting: submersed
part number: F-110-spectro (for horizontal attachment)
part number: F-120-spectro (for vertical attachment)recommended accessories
F-15 fixing adapter - stainless steel -
fixing adapter - stainless steel
- supports the proper and easy installation of s::can systems
- quick mounting and demounting of InSitu installed s::can probes and sensors
technical specification
housing material: stainless steel
weight (min.): 2.6 kg
process connection: ID 50 mm
part number: F-15recommended accessories
F-14-3 mounting pipe - stainless steel
by-pass
-
s::can compressor
- provides compressed air for s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling using compressed air
- aluminium housing IP65 for wall mounting
- optional 12 VDC or 110 VAC version available
- railing-mounting set available
technical specification
power supply: type B32-230: 230 VAC, type B32-110: 110 VAC,type B32-012: 12 VDC
power consumption (typical): AC 100 W DC 60 W (5,2A @ 12V)
power consumption (max.): AC 100 W DC 180 W (15A @ 12V)
assembling: ex works
housing material: aluminium
dimensions (width x height x depth): 218 x 253 x 105 mm
weight (min.): 4.9 kg
process connection: 1/4
installation / mounting: Mounting bracket d6 / 0.25 dia
operating temperature: -10 ... 40 °C
operating pressure: 0 ... 6 bar
Ingress protection class: IP 65
tank volume: 0.4 l
charging time: typ. 25 sec
sound emission: 60dB(A)
service interval: 1500 operating hours
storage temperature: -10 ... 60 °C
storage humidity: 0 ... 95%part numbers:
B-32-230,
B-32-110
B-32-012recommended accessories
B-44 cleaning valve
B-44-2 cleaning valve
C-31-eu optional 2 m power cable
C-31-us optional 2 m power cable -
cleaning valve
- supports automatic cleaning of measuring elements of s::can spectrometer probes, oxi::lyser, soli::lyser and ammo::lyser™
- removal of fouling, sediments and clogging using
- compressed air or water
- version B-44-2 specially for use in comination with the s::can compressor
technical specification
cable length: 2.4 m (B-44); 1 m (B-44-2)
assembling: ex works
dimensions (width x height x depth): 85 x 75 x 70 mm
weight (min.): 500 g
process connection: B-44: pressure side DIN 7.2 coupling, at sensor direction ID 3/8"; B-44-2: pressure side quick coupling d6x4, at sensor direction push-pull d6x4
protection class: IP 65
part number: B-44 or B-44-2recommended accessories
B-41-sensor: pressure connection replacement set oxi::lyser™ or ammo::lyser™ or soli::lyser
B-41-spectro: pressure connection replacement set s:.can spectrometer probe
More Accessories
-
cleaning brush
- supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
- mechanical removal of persistent window fouling
- for pathlength 2, 5 or 15 mm
technical specification
dimensions (diameter x length): length 200 mm
weight (min.): 1 g
part number: B-60-1 for 2 mm
part number: B-60-2 for 5 or 15 mm -
cleaning agent
- supports quick, easy and proper cleaning of optical windows of s::can spectrometer probes
- chemical removal of persistent window fouling
- very effective for grease and organic fouling
technical specification
weight (min.): 1.3 kg
part number: B-61-1 -
multifunctional slide for pathlengths from 0.5 mm to 35 mm
- for referencing of spectrometer probes
- for pathlength 0.5 - 35 mm
- for spectral measurement in laboratory
technical specification
dimensions (diameter x length): 60 x 100 mm (outside)
installation / mounting: for 0.5 mm to 35 mm
part number: E-421-1
You may also like…
-
visu::tool
visu::tool is a fast and easy-to-use data visualization software for PCs and notebooks. In 3 simple steps you can visualize huge amounts of data from con::cube or con::lyte into single or multiple graphs. The visu::tool “lyte” version is available for free download. The advanced visu::tool “pro” version includes a vast… -
micro::station for Drinking Water
The s::can drinking water micro::station is designed for online monitoring of water quality parameters in clean media. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipework on a compact panel. The fully modular micro::station combines s::can instruments… -
micro::station for Waste Water
The s::can micro::station for waste water is designed for online monitoring of water quality parameters in waste water. The required components – spectro::lyser, s::can probes and controller – are factory assembled with all required flow cells, mounting fittings and pipes on a compact panel. The fully modular micro::station combines s::can…