spectrolyser_V3_35mm

spectro::lyser V3

High performance online water quality monitoring! s::can proudly announces the launch of the next generation of spectrometers for online water quality monitoring. As the technology leader we have performed extensive research on our customers’ needs and developed the spectro::lyser V3 based on these results.

 

spectro::lyser™ UV-Vis monitors depending on the application an individual selection of: TSS, TS, turbidity, color, TOC, DOC, BOD, COD, NO3-N, NO3, chloramine, HS-, O3, CLD, Chl-a, BTX, UV254, fingerprints, spectral alarms and temperature

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser titanium pro

spectro::lyser titanium pro

 

spectro::lyser™ titanium pro monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-720 nm)
  • ideal for industrial waste water, desalination and sea water
  • rugged design with titanium grade 2 housing
  • factory precalibrated, with advanced calibration service included
  • long term stable and maintenance free in operation
  • automatic cleaning with compressed air or brush
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • adaption of optical path lengths to 35 mm, 5 mm, 2 mm, or 0.5 mm possible
  • easy mounting without clogging

spectrolyser titanium pro highlights

 

spectrolyser industrial ATEX

spectro::lyser industrial ATEX

 

spectro::lyser™ industrial monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-720 nm)
  • ideal for industrial waste water and sewer applications
  • explosion proof specification according to RL 2014/34/EU, TÜV-A16 ATEX
  • factory precalibrated, with advanced calibration service included
  • long term stable and maintenance free in operation
  • automatic cleaning with compressed air or brush
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • adaption of optical path lengths to 35 mm, 15 mm, 5 mm, 2 mm, 1 mm or 0.5 mm possible
  • easy mounting without clogging

spectrolyser industrial highlights

 

spectrolyser_35mm

spectro::lyser UV

The spectro::lyser™ measures the entire absorption spectrum and is used by many drinking water providers all over the world as a pivotal component in their raw water monitoring. The spectro::lyser™ with its capability to measure and analyze the absorption spectrum in its entirety allows detection of a multitude of organic substances.

 

spectro::lyser™ UV monitors depending on the application an individual selection of: NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, BTX, AOC, fingerprints and spectral alarms, temperature and pressure.

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (200-750 nm or 200-390 nm)
  • multiparameter probe with adjustable open path length
  • ideal for surface water, ground water, drinking water and waste water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air
  • mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
  • operation via s::can terminals & s::can software
  • recomended by and complient with public authorities and international agencies such as Chinese EPA, US EPA and CPCB
iscan_35_kurz_1000px_q4

i::scan

i::scan - the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi wavelength spectrophotometer with even lower costs than simple photometers!

 

  • s::can plug & measure
  • turbidity: measurement according to EPA 180.1 and ISO 7027, 90° scattering (35 mm path length)
  • new light emitting technology
  • no consumables, no moving parts
  • special, non-fouling optical window material
  • low power consumption (less than 1 W typical)
  • dual-beam compensated optics
  • optional automatic cleaning compressed air (InSitu, only for version -075 with fixed cable) or autobrush
  • multiple versions for multiple applications
  • long term stable, 100 % corrosion free
  • plug connection or fixed cable
  • 5000 hours maintenance free operation
  • mounting and measurement directly in the media (in situ) or in flow cell
  • can be mounted directly in a mains pipe / pressure pipe
  • operation via s::can terminals & s::can Software

Visit i-scan.at for more information

Optimizing the performance of drinking water filtration with the i::scan
Optimizing the performance of drinking water filtration with the i::scan

In Puerto Rico the i::scan is used to asses the efficiency of different coagulants and to optimize cleaning protocols of drinking water filtration units.

read more
City of Zurich monitors the quality of its drinking water with s::can
City of Zurich monitors the quality of its drinking water with s::can

s::can’s event detection system monitors the drinking water quality in Zurich’s piping system with the revolutionary i::scan

read more
Vitens is setting up a smart water grid with s::can nano::stations
Vitens is setting up a smart water grid with s::can nano::stations

Vitens is the largest drinking water utility in the Netherlands. The company is currently installing a large-scale smart drinking water mains network in the province of Friesland. More than 2200 read more

Process optimization at the Appenzeller Beer Brewery
Process optimization at the Appenzeller Beer Brewery

The Appenzeller Bier brewery is a family owned company that is famous for their highest quality specialty beers. It is part of their authentic green philosophy to conserve and protect the beautiful read more

Monitoring Belgian drinking water quality from source to tap
Monitoring Belgian drinking water quality from source to tap

In Belgium, the pipe::scan and the micro::station are used to monitor the drinking water network. Up to 10 parameters are measured simultaneously and s::can’s event read more

spectrolyser_5_mm

carbo::lyser

The carbo::lyser is ideal for the measurement of the organic carbon load, represented by parameters like SAC, T(D)OC, COD, or BOD, and at the same time, turbidity / solids concentration. Applicability ranges from pure water to industrial waste water. Pre-calibrations for different types of water and applications significantly facilitate use.

 

carbo::lyser™ II monitors TSS & UV254 or TSS & COD or TSS & BOD or TSS & TOC or TSS & DOC

carbo::lyser™ III monitors TSS & UV254 & UV254t or TSS COD & BOD or Turbidity & TOC & DOC or TSS & COD & CODf

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry
  • multiparameter probe
  • long term stable and maintenance free in operation
  • factory precalibrated
  • automatic cleaning with compressed air
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • operation via s::can terminals & s::can software
  • automatic compensation of cross sensitivities
  • applications in surface water, ground water, drinking water and waste water
Global Calibrations

The so called plug & measure principle lies at the heart of s::can’s monitoring systems. Simple and quick installation and start-up, reliable results as soon as the instrument hits the water,...

The so called plug & measure principle lies at the heart of s::can’s monitoring systems. Simple and quick installation and start-up, reliable results as soon as the instrument hits the water, that is what plug & measure is all about. This simplicity allows the users to work with s::can instruments without extensive training, because no complicated calibrations or maintenance activities are needed. At the heart of this plug & measure capability is our spectrometer probe, its hardware (no moving parts, no consumables, long term stability, …) as well as the s::can software. The Global Calibrations, however, are the real key to its performance.

The Global Calibration on a spectro::lyser™ contains all the settings and algorithms (such as for specific parameters) that enable the instrument to measure multiple parameters in a wide range of applications. Each Global Calibration is optimized for measurements in a particular environment and are available for applications ranging from drinking water, river water through wastewater treatment plant influent and effluent all the way to industrial wastewaters. Examples of the latter are brewery, dairy and paper mill wastewater.

Each Global Calibration is developed by s::can using a large dataset of measurements from a particular application type, and benefits from our extensive experience and know-how we gained from applying spectrometry in the most diverse applications. For example, a drinking water global calibration is developed using spectra and laboratory measurements from drinking waters from all around the world. Using advanced statistical methods, the spectral algorithms for the calculation of for example, turbidity and nitrate are then developed. The result; Global Calibrations for all common application types that allow one basic piece of equipment, the spectrometer probe, to be used in a multitude of widely different water types.

s::can Global Calibrations can be used in a plug and measure fashion because the spectrometer probes are true spectrophotometer instruments that measure the entire UV and visible absorption spectrum. Opposed to a single or dual wavelength instrument, that at best give a rough indication of how much nitrate or TOC is present, the full spectral capability of the spectrometer probe allows selective and accurate simultaneous measurement of multiple parameters with a single measuring device. The full spectrum is used to adapt the algorithms to the typical matrix in an application. Furthermore, this information is used for turbidity compensation and it is used to remove cross sensitivities for other parameters. All of this leads to much more precise and accurate measurement results when compared to competing technologies.

Thus, the Global Calibration is the tool that allows the spectrometer probe to make sense of your water; it interprets the spectrum, knowing what to expect in the application it is used in. As a result, it provides reliable results without the need to extensive calibrations. The Global Calibration is what enables us to pack such a big punch into our spectro::lyser™.

No image found

multi::lyser

The multi::lyser is a combination of s::can carbo::lyser and nitro::lyser. That means that the s::can multi::lyser is characterised by measuring organic carbon & nitrate for a multitude of pre-defined applications. The multi::lyser is ideal for suface water, ground water, drinking water, waste water and offers an optimum of costeffectiveness and performance.

 

multi::lyser™ II monitors NO3-N & one organic parameter (COD, BOD, TOC, DOC or UV254)

multi::lyser™ III montiors TSS & NO3-N & one organic parameter (COD, BOD, TOC, DOC or UV254)

  •  s::can plug & measure
  •  measuring principle: UV-Vis spectrometry
  •  multiparameter probe
  •  ideal for surface water, ground water, drinking water and waste water
  •  long term stable and maintenance free in operation
  •  factory precalibrated
  •  automatic cleaning with compressed air
  •  mounting and measurement directly in the media (InSitu) or in Bypass (monitoring station)
  • operation via s::can terminals & s::can software
Global Calibrations

The so called plug & measure principle lies at the heart of s::can’s monitoring systems. Simple and quick installation and start-up, reliable results as soon as the instrument hits the water,...

The so called plug & measure principle lies at the heart of s::can’s monitoring systems. Simple and quick installation and start-up, reliable results as soon as the instrument hits the water, that is what plug & measure is all about. This simplicity allows the users to work with s::can instruments without extensive training, because no complicated calibrations or maintenance activities are needed. At the heart of this plug & measure capability is our spectrometer probe, its hardware (no moving parts, no consumables, long term stability, …) as well as the s::can software. The Global Calibrations, however, are the real key to its performance.

The Global Calibration on a spectro::lyser™ contains all the settings and algorithms (such as for specific parameters) that enable the instrument to measure multiple parameters in a wide range of applications. Each Global Calibration is optimized for measurements in a particular environment and are available for applications ranging from drinking water, river water through wastewater treatment plant influent and effluent all the way to industrial wastewaters. Examples of the latter are brewery, dairy and paper mill wastewater.

Each Global Calibration is developed by s::can using a large dataset of measurements from a particular application type, and benefits from our extensive experience and know-how we gained from applying spectrometry in the most diverse applications. For example, a drinking water global calibration is developed using spectra and laboratory measurements from drinking waters from all around the world. Using advanced statistical methods, the spectral algorithms for the calculation of for example, turbidity and nitrate are then developed. The result; Global Calibrations for all common application types that allow one basic piece of equipment, the spectrometer probe, to be used in a multitude of widely different water types.

s::can Global Calibrations can be used in a plug and measure fashion because the spectrometer probes are true spectrophotometer instruments that measure the entire UV and visible absorption spectrum. Opposed to a single or dual wavelength instrument, that at best give a rough indication of how much nitrate or TOC is present, the full spectral capability of the spectrometer probe allows selective and accurate simultaneous measurement of multiple parameters with a single measuring device. The full spectrum is used to adapt the algorithms to the typical matrix in an application. Furthermore, this information is used for turbidity compensation and it is used to remove cross sensitivities for other parameters. All of this leads to much more precise and accurate measurement results when compared to competing technologies.

Thus, the Global Calibration is the tool that allows the spectrometer probe to make sense of your water; it interprets the spectrum, knowing what to expect in the application it is used in. As a result, it provides reliable results without the need to extensive calibrations. The Global Calibration is what enables us to pack such a big punch into our spectro::lyser™.

spectrolyser_5_mm

nitro::lyser

Applications range from (ultra) pure water in the μg/l range up to industrial waste water in the g/l range. The nitrate concentration displayed is not sensitive to cross-influences from other substance groups such as organic carbon or total solids. The measured parameters are always nitrate and turbidity / solids concentration.

 

nitro::lyser II monitors TSS & NO3-N or turbidity & NO3-N

  •  s::can plug & measure
  •  measuring principle: UV-Vis spectrometry
  •  multiparameter probe
  •  ideal for surface water, ground water, drinking water and waste water
  •  long term stable and maintenance free in operation
  •  factory precalibrated
  •  automatic cleaning with compressed air
  •  mounting and measurement directly in the media (InSitu) or in Bypass (monitoring station)
  • operation via s::can terminals & s::can software
Colorado Springs Utilities effectively controls aeration blowers in its wastewater treatment plant
Colorado Springs Utilities effectively controls aeration blowers in its wastewater treatment plant

s::can’s ammo::lyser monitors and controls aeration blowers using NH4-N, improving the plant’s energy efficiency and lowering operational costs.

read more
f_spectrolyser_h460px1

ozo::lyser

Measurement of ozone in water is what the ozo::lyser is optimized for. This member of the spectrometer family is optimized to determine concentrations of ozone dissolved in water online and InSitu. It offers an attractive alternative to classical electrochemical ozone sensors, thanks to its very low maintenance requirement and extreme stability.

 

ozo::lyser II monitors turbidity & ozone

  •  s::can plug & measure
  •  measuring principle: UV-Vis spectrometry
  •  multiparameter probe
  •  ideal for drinking water
  •  long term stable and maintenance free in operation
  •  factory precalibrated
  •  mounting and measurement directly in the media (InSitu) or in Bypass (monitoring station)
  •  operation via s::can terminals & s::can software
spectrolyser_5_mm

sulfi::lyser

The sulfi::lyser is ideal for the measurement of TSS & HS & NO3-N and in combination with the con::cube terminal and an additional pH::lyser it can also be used to measure H2S.

 

sulfi ::lyser II monitors TSS & HS & H2S*
sulfi ::lyser III monitors TSS & HS & NO3-N & H2S*

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry
  • multiparameter probe
  • long term stable and maintenance free in operation
  • factory precalibrated
  • automatic cleaning with compressed air
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • operation via s::can terminals & s::can software
  • automatic compensation of cross sensitivities
  • ideal for surface water, ground water, drinking water and waste water
  • robust and precise adaption of optical path lengths to 35 mm, 15 mm, 5 mm, 2 mm, 1 mm or 0.5 mm possible
  • easy mounting without clogging

* only possible when using the con::cube terminal and installing an additional pH::lyser

spectrolyser_5_mm

uv::lyser

The uv::lyser monitors turbidity or TSS and up to 4 freely chosen wavelengts between 190 and 720 nm. Furthermore, depending on the application, it also measures turbidity or solids. The uv::lyser provides cost effective but accurate and precise instrument for applications in surface water, ground water, drinking water and wastewater.

 

uv::lyser monitors turbidity or TSS and up to 4 freely chosen wavelengths between 190 and 720 nm

  •  s::can plug & measure
  •  measuring principle: UV-Vis spectrometry
  •  multiparameter probe, for up to four parameters
  •  ideal for surface water, ground water, drinking water and waste water
  •  long term stable and maintenance free in operation
  •  factory precalibrated
  •  automatic cleaning with compressed air
  •  mounting and measurement directly in the media (InSitu) or in Bypass (monitoring station)
  •  operation via s::can terminals & s::can software
  •  robust and precise adaption of optical path lengths to 35 mm, 15 mm, 5 mm, 2 mm, 1 mm or 0.5 mm possible
  • easy mounting without clogging

Register for the s::can newsletter to receive the latest product and industry updates!