spectrolyser_V3_35mm

spectro::lyser V3

High performance online water quality monitoring! s::can proudly announces the launch of the next generation of spectrometers for online water quality monitoring. As the technology leader we have performed extensive research on our customers’ needs and developed the spectro::lyser V3 based on these results.

 

spectro::lyser™ UV-Vis monitors depending on the application an individual selection of: TSS, TS, turbidity, color, TOC, DOC, BOD, COD, NO3-N, NO3, chloramine, HS-, O3, CLD, Chl-a, BTX, UV254, fingerprints, spectral alarms and temperature

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser titanium pro

spectro::lyser titanium pro

 

spectro::lyser™ titanium pro monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-720 nm)
  • ideal for industrial waste water, desalination and sea water
  • rugged design with titanium grade 2 housing
  • factory precalibrated, with advanced calibration service included
  • long term stable and maintenance free in operation
  • automatic cleaning with compressed air or brush
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • adaption of optical path lengths to 35 mm, 5 mm, 2 mm, or 0.5 mm possible
  • easy mounting without clogging

spectrolyser titanium pro highlights

 

spectrolyser industrial ATEX

spectro::lyser industrial ATEX

 

spectro::lyser™ industrial monitors depending on the application an individual selection of: TSS, turbidity, NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, color, O3, HS-, BTX, AOC, fingerprints and spectral alarms, temperature and pressure

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-720 nm)
  • ideal for industrial waste water and sewer applications
  • explosion proof specification according to RL 2014/34/EU, TÜV-A16 ATEX
  • factory precalibrated, with advanced calibration service included
  • long term stable and maintenance free in operation
  • automatic cleaning with compressed air or brush
  • mounting and measurement directly in the media (InSitu) or in a flow cell (monitoring station)
  • adaption of optical path lengths to 35 mm, 15 mm, 5 mm, 2 mm, 1 mm or 0.5 mm possible
  • easy mounting without clogging

spectrolyser industrial highlights

 

spectrolyser_35mm

spectro::lyser UV

 

spectro::lyser™ UV monitors depending on the application an individual selection of: NO3-N, COD, BOD, TOC, DOC, UV254, NO2-N, BTX, AOC, fingerprints and spectral alarms, temperature and pressure.

  • s::can plug & measure
  • measuring principle: UV-Vis spectrometry over the total range (190-390 nm)
  • multiparameter probe with adjustable open path length
  • ideal for surface water, ground water, drinking water and waste water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air
  • mounting and measurement directly in the media (InSitu) or in flow cell (monitoring station)
  • operation via s::can terminals & s::can software
  • recomended by and complient with public authorities and international agencies such as Chinese EPA, US EPA and CPCB
iscan_35_kurz_1000px_q4

i::scan

i::scan - the new miniature multi-parameter spectrophotometer probe will revolutionize online water quality monitoring: From very cost sensitive applications down to highly resolved “Smart Water Grids”, in small unmanned plants, or even in single building protection. The new i::scan combines the high performance of a multi wavelength spectrophotometer with even lower costs than simple photometers!

 

  • s::can plug & measure
  • turbidity: measurement according to EPA 180.1 and ISO 7027, 90° scattering (35 mm path length)
  • new light emitting technology
  • no consumables, no moving parts
  • special, non-fouling optical window material
  • low power consumption (less than 1 W typical)
  • dual-beam compensated optics
  • optional automatic cleaning compressed air (InSitu, only for version -075 with fixed cable) or autobrush
  • multiple versions for multiple applications
  • long term stable, 100 % corrosion free
  • plug connection or fixed cable
  • 5000 hours maintenance free operation
  • mounting and measurement directly in the media (in situ) or in flow cell
  • can be mounted directly in a mains pipe / pressure pipe
  • operation via s::can terminals & s::can Software

Visit i-scan.at for more information

Optimizing the performance of drinking water filtration with the i::scan
Optimizing the performance of drinking water filtration with the i::scan

In Puerto Rico the i::scan is used to asses the efficiency of different coagulants and to optimize cleaning protocols of drinking water filtration units.

read more
City of Zurich monitors the quality of its drinking water with s::can
City of Zurich monitors the quality of its drinking water with s::can

s::can’s event detection system monitors the drinking water quality in Zurich’s piping system with the revolutionary i::scan

read more
Vitens is setting up a smart water grid with s::can nano::stations
Vitens is setting up a smart water grid with s::can nano::stations

Vitens is the largest drinking water utility in the Netherlands. The company is currently installing a large-scale smart drinking water mains network in the province of Friesland. More than 2200 read more

Process optimization at the Appenzeller Beer Brewery
Process optimization at the Appenzeller Beer Brewery

The Appenzeller Bier brewery is a family owned company that is famous for their highest quality specialty beers. It is part of their authentic green philosophy to conserve and protect the beautiful read more

Monitoring Belgian drinking water quality from source to tap
Monitoring Belgian drinking water quality from source to tap

In Belgium, the pipe::scan and the micro::station are used to monitor the drinking water network. Up to 10 parameters are measured simultaneously and s::can’s event read more

spectrolyser_V3_35mm

carbo::lyser V3

The carbo::lyser is ideal for the measurement of the organic carbon load, represented by parameters like UV254, TOC, DOC, COD, or BOD, and at the same time, turbidity / solids concentration. Applicability ranges from pure water to industrial waste water. Pre-calibrations for different types of water and applications significantly facilitate use.

 

carbo::lyser™ II monitors 2 of the following parameters: TSS, Turbidity, TOC, DOC, BOD, COD, COD f, UV254 and UV254 f

carbo::lyser™ III monitors 3 of the follwing parameters: TSS, Turbidity, TOC, DOC, BOD, COD, COD f, UV254 and UV254 f

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser_V3_35mm

ozo::lyser V3

Measurement of ozone in water is what the ozo::lyser is optimized for. This member of the spectrometer family is optimized to determine concentrations of ozone dissolved in water online and InSitu. It offers an attractive alternative to classical electrochemical ozone sensors, thanks to its very low maintenance requirement and extreme stability.

 

ozo::lyser II monitors 2 of the following parameters: TSS, turbidity & ozone

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser_V3_35mm

nitro::lyser V3

Applications range from (ultra) pure water in the μg/l range up to industrial waste water in the g/l range. The nitrate concentration displayed is not sensitive to cross-influences from other substance groups such as organic carbon or total solids. The measured parameters are always nitrate and turbidity / solids concentration.

 

nitro::lyser™ II monitors 2 of the following parameters: Turbidity, TSS, TS, NO3-N and NO3

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser_V3_35mm

multi::lyser V3

The multi::lyser is a combination of s::can carbo::lyser and nitro::lyser. That means that the s::can multi::lyser is characterised by measuring organic carbon & nitrate for a multitude of pre-defined applications. The multi::lyser is ideal for suface water, ground water, drinking water, waste water and offers an optimum of cost effectiveness and performance.

 

multi::lyser™ IV monitors 4 of the following parameters: Turbidity, TSS, TS, TOC, DOC, BOD, COD, COD f, NO3-N, NO-3, UV254 and UV254 f

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack

 

spectrolyser_V3_35mm

uv::lyser V3

The uv::lyser monitors turbidity or TSS and up to 4 freely chosen wavelengts between 190 and 720 nm. Furthermore, depending on the application, it also measures turbidity or solids. The uv::lyser provides cost effective but accurate and precise instrument for applications in surface water, ground water, drinking water and wastewater.

 

uv::lyser monitors turbidity or TSS and up to 4 freely chosen wavelengths between 190 and 720 nm

  • measuring principle: UV-Vis spectrometry over the total range (190-750 nm)
  • web server on board - IoT enabled, no user software is needed to configure the probe
  • communicates directly with your mobile device via Bluetooth or WLAN
  • choose exactly the parameters you want to measure – unlimited number of parameters possible
  • 8 GB onboard memory - capacity for logging data for many years
  • improved optical performance - revolutionary precision
  • fast measurement interval - every 10 seconds
  • extremely power efficient - sleep mode for low energy consumption
  • multiparameter probe with 1 mm, 5 mm or 35 mm optical path length, ideal for waste water, surface water and drinking water
  • long term stable and maintenance free in operation
  • factory precalibrated, local multi-point calibration possible
  • automatic cleaning with compressed air or brush/ruck::sack